Phase Noise 생성 활성화 플래그 수정 및 datasheet 정보를 이용한 phasenoise를 우선 적용하도록 수정.

03. Rx Path/apply_lna_and_mixer.m

@@ -22,8 +22,10 @@ function [adc_raw_data, adc_combined] = apply_lna_and_mixer(RxOut, TxOut, RadarP
     phase_noise_cfg = struct();
     if isfield(RadarParams.Waveform.nonideal, 'phaseNoise')
         phase_noise_cfg = RadarParams.Waveform.nonideal.phaseNoise;
-        if isfield(phase_noise_cfg,'enabled') && phase_noise_cfg.enabled && ...
+        has_offset = isfield(phase_noise_cfg,'offset_Hz') && ~isempty(phase_noise_cfg.offset_Hz);
-           isfield(phase_noise_cfg,'offset_Hz') && isfield(phase_noise_cfg,'level_dBc_Hz')
+        has_level = isfield(phase_noise_cfg,'level_dBc_Hz') && ~isempty(phase_noise_cfg.level_dBc_Hz);
+        same_length = has_offset && has_level && (numel(phase_noise_cfg.offset_Hz) == numel(phase_noise_cfg.level_dBc_Hz));
+        if same_length
             use_datasheet_phase_noise = true;
         end
     end

04. Signal Processing/visualize_rd_map_with_spurs.m

@@ -61,7 +61,6 @@ function fig = visualize_rd_map_with_spurs(target_rd_map, r_axis, v_axis, Target
         ni = RadarParams.Waveform.nonideal;
         enable_phase_noise = false;
         enable_nonlinearity = false;
-        enable_datasheet_phase_noise = false;
         
         if isfield(ni,'enable_phase_noise')
             enable_phase_noise = logical(ni.enable_phase_noise);
@@ -69,12 +68,8 @@ function fig = visualize_rd_map_with_spurs(target_rd_map, r_axis, v_axis, Target
         if isfield(ni,'enable_nonlinearity')
             enable_nonlinearity = logical(ni.enable_nonlinearity);
         end
-        if isfield(ni,'phaseNoise') && isstruct(ni.phaseNoise) && isfield(ni.phaseNoise,'enabled')
-            enable_datasheet_phase_noise = logical(ni.phaseNoise.enabled);
-        end
-        
         show_nonideal_overlay = show_nonideal_overlay && ...
-            (enable_phase_noise || enable_nonlinearity || enable_datasheet_phase_noise);
+            (enable_phase_noise || enable_nonlinearity);
     end
 
     % --- 2. LO/ADC 톤 스퍼 표시 ---

Main.m

@@ -42,12 +42,11 @@ RadarParams.Waveform.nonideal.pn_level         = 0.05;      % 위상노이즈
 RadarParams.Waveform.nonideal.f_ripple         = 300e3;     % 위상 리플 주파수
 RadarParams.Waveform.nonideal.peak_phase_error = 0.1;       % 최대 위상오차
 RadarParams.Waveform.nonideal.power_drop_edge  = 0.8;       % 엣지 파워 드롭
-RadarParams.Waveform.nonideal.enable_phase_noise = false;    % phase noise on/off
+RadarParams.Waveform.nonideal.enable_phase_noise = true;    % phase noise on/off
 RadarParams.Waveform.nonideal.enable_nonlinearity = false;   % nonlinearity on/off
 % Datasheet 기반 phase noise 설정 (예: -89 dBc/Hz @ 1 MHz)
 RadarParams.Waveform.nonideal.phaseNoise.offset_Hz = [1e6];
 RadarParams.Waveform.nonideal.phaseNoise.level_dBc_Hz = [-89];
-RadarParams.Waveform.nonideal.phaseNoise.enabled = false;
 
 % 2-3) MIMO 모드 설정
 RadarParams.Waveform.mimoMode = 'TDM';     % 'TDM' 또는 'DDMA'