Initial ARSS. Need to improve and add functions.

2026-03-02 14:48:21 +09:00
commit 775668afdb
20 changed files with 1610 additions and 0 deletions
@@ -0,0 +1,81 @@
+function fig = visualize_antenna_pattern(PatternArray, AntennaName)
+    % visualize_antenna_pattern: 여러 개의 안테나 패턴 단면을 겹쳐서 도시합니다.
+    % 입력에 AntennaName (예: 'TX', 'RX')을 추가하여 창 이름을 구분합니다.
+    if nargin < 2
+        AntennaName = 'Antenna'; % 기본값
+    end
+    
+    fig_name = sprintf('%s Radiation Pattern Cuts', AntennaName);
+    fig = figure('Name', fig_name, 'Position', [200, 200, 1000, 700]);
+    NumAnt = length(PatternArray);
+    
+    colors = lines(NumAnt);
+
+    % [전역 Y축 범위 탐색]
+    y_min_total = inf;
+    y_max_total = -inf;
+    for i = 1:NumAnt
+        pat = PatternArray(i);
+        if strcmpi(pat.Type, '2D')
+            y_min_total = min(y_min_total, min(pat.gain_dBi(:)));
+            y_max_total = max(y_max_total, max(pat.gain_dBi(:)));
+        else
+            y_min_total = min(y_min_total, min([pat.gain_az_dBi(:); pat.gain_el_dBi(:)]));
+            y_max_total = max(y_max_total, max([pat.gain_az_dBi(:); pat.gain_el_dBi(:)]));
+        end
+    end
+
+    % ---------------------------------------------------------
+    % [Subplot 1] 상단: Azimuth Pattern Cut
+    % ---------------------------------------------------------
+    subplot(2, 1, 1);
+    hold on; grid on;
+    
+    for i = 1:NumAnt
+        pat = PatternArray(i);
+        
+        if strcmpi(pat.Type, '2D')
+            el0_idx = find(abs(pat.el_angles - 0) < 1e-6, 1);
+            az_gain_cut = pat.gain_dBi(el0_idx, :);
+        else
+            az_gain_cut = pat.gain_az_dBi;
+        end
+        
+        plot(pat.az_angles, az_gain_cut, '-', 'Color', colors(i,:), 'LineWidth', 2.5, 'DisplayName', sprintf('%s %d', AntennaName, i));
+    end
+    
+    title(sprintf('[%s] Azimuth Radiation Pattern Cut (at Elevation = 0^\\circ)', AntennaName), 'FontSize', 12);
+    xlabel('Azimuth Angle (deg)', 'FontSize', 11);
+    ylabel('Antenna Gain (dBi)', 'FontSize', 11);
+    xlim([min(PatternArray(1).az_angles), max(PatternArray(1).az_angles)]);
+    ylim([y_min_total - 2, y_max_total + 2]);
+    legend('show', 'Location', 'south');
+    hold off;
+
+    % ---------------------------------------------------------
+    % [Subplot 2] 하단: Elevation Pattern Cut
+    % ---------------------------------------------------------
+    subplot(2, 1, 2);
+    hold on; grid on;
+    
+    for i = 1:NumAnt
+        pat = PatternArray(i);
+        
+        if strcmpi(pat.Type, '2D')
+            az0_idx = find(abs(pat.az_angles - 0) < 1e-6, 1);
+            el_gain_cut = pat.gain_dBi(:, az0_idx);
+        else
+            el_gain_cut = pat.gain_el_dBi;
+        end
+        
+        plot(pat.el_angles, el_gain_cut, '-', 'Color', colors(i,:), 'LineWidth', 2.5, 'DisplayName', sprintf('%s %d', AntennaName, i));
+    end
+    
+    title(sprintf('[%s] Elevation Radiation Pattern Cut (at Azimuth = 0^\\circ)', AntennaName), 'FontSize', 12);
+    xlabel('Elevation Angle (deg)', 'FontSize', 11);
+    ylabel('Antenna Gain (dBi)', 'FontSize', 11);
+    xlim([min(PatternArray(1).el_angles), max(PatternArray(1).el_angles)]);
+    ylim([y_min_total - 2, y_max_total + 2]);
+    legend('show', 'Location', 'south');
+    hold off;
+end